How you can Close or Winterize Your In Ground Swimming Pool

Shutting a swimming pool can be a lot of work, but it doesn’t have to be!

You may be thinking about questions like: “can I shut a swimming pool by myself? ” or “is closing a swimming pool difficult or difficult? ” Well… Here is a quick list of things that you have to do in order to get your pool closed down for the winter. Is this an exhausted list? Nope… So you be the judge on whether or not you should close your own swimming pool or give your local professional call.

Closing a pool for the winter time can be a daunting task. And by daunting, we mean that (for the average person) it’s not the most fun thing to do on their to do list.

There’s a lot of work that goes into closing a pool and that includes things such as:

Step 1 in closing a swimming pool:

Alter pH levels, calcium hardness, and alkalinity (pretty fancy stuff, right? )

By ensuring that your pH levels, calcium hardness, and alkalinity in are balance, you’re safeguarding your swimming pool investment from corrosion or scale buildup that can take place over the winter while the pool is closed! These adjustments can be produced a few days before your completely close up down the pool.

Adjust the pH to between 7. 2 and 7. 8

Adjust the alkalinity to between 80 and 120ppm (that’s fancy talk for components per million)

Adjust the calcium hardness to between 180 plus 250ppm
Step 2 in closing a pool:

Shock the water with Chlorine

You may use either chlorine or a non-chlorine substitute to kill bacteria that may be living the in pool (yup… it can in there! ) Make sure to get a shock treatment that’s at least 65% salt hypochlorite or a non-chlorine substitute associated with equal strength. Fill a 5 gallon pail with pool drinking water, add the instruction amount of treatment, and pour it into the pool while the filtration system is running.

If the shock treatment is “safe for individuals to swim in right away” it’s probably not strong enough to destroy all of the bacteria in your pool; so , since you’re not going to be swimming in it (because you’re closing the swimming pool) use the stronger things.

Don’t add the water to the surprise treatment, add the shock treatment to the water (trust us about this one)

Allow the chlorine level to obtain back to 1 to 3ppm over the few day time span before getting to the next step during the pool season if it’s in use. The stronger algaecide is intended to prevent algae from blooing almost all winter long
Step 3 in closing a swimming pool:

Clean the pool

Get rid of anything in the pool that isn’t H2O (water). Ladders, baskets, pumps, heaters, decorations, filters, hoses…
Hose away all of the pool equipment and put it out to dry before you store it.
Skim it (not the particular milk, the pool).
Vacuum and brush the swimming pool. Do this stuff the same day that you close this to keep more debris from falling in
Step 4 in closing a swimming pool:

Lower the water level and empty all of the equipment.

Use a pump to reduce the water level.
Should you adored this information and you desire to obtain more details regarding Stahlwandpool i implore you to go to our own web site.
It should be lower than the particular skimmer (this depends on the type of swimming pool cover you’re using).
For a mesh cover, the water should be 12-18 in . below the skimmer.
For a strong, floating cover, the water should be 3-6 inches below the skimmer.
Drain the equipment (pumps, heaters, chlorinators, filters… ). If water freezes in there, it could damage it.
Open up all of the drains on the equipment and let the water out
Take the filters off plus clean them thoroughly before storing them in a dry place inside for the winter
If you can’t take the filters out, work with a shop vac or an air compressor to blow the remaining water from them
Step 5 in closing a swimming pool.

Winterize the plumbing

The lines running water into the pool have to be dry so that they don’t freeze upward and crack over the winter
Use a shop vac to blow surroundings from the skimmer through the equipment and back into the pool. Use the expansion plugs to plug the outlines so that more water doesn’t get into them
If you choose not to blowout the lines, you can add swimming pool anti-freeze to them to prevent remaining water through freezing, but make sure you follow the instructions (as with any and all of this things! )
Step 6 in closing the swimming pool.

Apply the pool cover

Make sure the cover you’re using is perfect for your pool! If it leaves gaps debris can enter the pool over the winter and cause issues afterwards…
Mesh safety covers are the best choice
Solid floating covers don’t suit as tightly, so you may have to generate rainwater and other debris that get into your pool over the winter
Make use of water bags or aquablocks to ensure that the cover is secured because tightly as possible
Have trees close to your pool? Get a leaf net to put over it and catch particles
Air Pillows are used to prevent the growth of ice in above floor pools (for those of you with within ground pools, you don’t need these)
Inflate the air pillows with a leaf blower or shop vac and connect them in the center of the pool (if you have a big pool you may need more than one)
It you’ve made it this particular far, you’ve done it! Congratulations and check back to see how to open up your swimming pool when the time comes. See you soon and have a great winter!

Leave a Reply

Your email address will not be published. Required fields are marked *