Things To Look Out For When Buying Pave Diamond Rings

Once you shop for one of these, you may want to be aware of a few of the problems and misinformation that you might receive from the sales associate involved. We wish to clarify some of those:

– Dimension is not an issue

Really? Please understand that moving the metal, which is exactly what sizing means, is not only an issue, but a real problem. The diamonds are usually set either pressed into the gold with some gold covering the diamonds, or held in place with prongs. As soon as you mess with the structure of the ring by sizing the band up or down, you risk the stones falling out at some point. Let me clarify that… you may leave the jewelry store with a perfect pave diamond ring, but several weeks after the purchase stones might start falling out. Right now there really isn’t anything quite since frustrating, than having to send your ring back to the jeweler time after time, because of loose diamonds.

The solution to this is very simple. Sizing, up or down, of one number is not a problem, from then on any decent jeweler will offer to make the specific ring in you precise size, therefore avoiding any possible problems. The draw back to this is that you simply will not have your ring the moment you need it, but trust me, in the long term you will end up much happier, if you show a few patience.

Clarity doesn’t matter

Properly, it does! While you can not see blemishes easily with small diamonds (simply because of the size of the stones), it is possible to see the difference in performance, if you pay attention. We suggest, as a rule, that you stay away from any diamonds that are I1 in clarity or below. While it is difficult to see the difference within those stones, the performance (fire and brilliance) will suffer greatly and after all, you are buying a pave diamond ring for its fire and brilliance. Our suggestion is stones in the SI1 to SI3 range (SI3 being an EGL grade). This way, you are getting diamonds, that are clean to the naked eye (simply because they are so small) and perform the way you want.

: Color doesn’t matter

We do agree with this statement to a certain degree. The only time the color from the diamonds in pave diamond bands is important, is when you choose the color associated with gold these stones should be emerge. The general rule is that any diamond jewelry set in white gold, should be colour J or above. The reason for this really is simple, since any color beneath J will show a yellow-colored tint against a white precious metal setting.

Cut doesn’t matter

This has got to be the worst, misleading declaration a sales associate could ever make in our opinion. Cut is the central of all the Cs, since it will have an effect on all the other characteristics of the gemstones set in your pave diamond ring. Look at it this way. A diamond that is reduce correctly will show maximum fire and brilliance. There will be so much going on, that it will be difficult to see any inclusions, or color for that matter. Basically, the better the cut, the more forgiving you can be on color and clarity!

The carat weight of each stone doesn’t matter

This is true! After all, you are buying a pave diamond ring, because it is composed of a multitude of small diamonds, each with 57 facets (cuts). The whole beauty lies in the fact that you have a large amount of individually cut diamonds spread all over your pave diamond ring.
When you have any inquiries regarding wherever and also the best way to make use of 鑽石, you can call us in the website.

Almost all pave diamond rings are created the same

Nothing could be further from the truth. If you read this far, you are going to understand why this statement would create no sense at all. A gemstone with a better cut, better clarity and better color will always have a better performance.

Leave a Reply

Your email address will not be published. Required fields are marked *